Sunday, July 20, 2014

A Squeeze A Day

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey.
You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
Breast Cancer Awareness Kit by TopCats Tagz  HERE
Millie's PSP Madness Template #370   HERE
Look on the left side and you will see the bulk dl from 351-400
 Millie's Madness Mask #54  HERE
Filters
PhotoEffex-Scanlines
Font of Choice, I used Scriptina Pro

Drop Shadow usually V2 H2 50 black
 
Let's get started
*Remember to add your drop shadow as you go along*

Duplicate your template, hold the shift key and the letter d
Close the original and delete the credits

Paste paper 7, apply your mask, delete and merge group.

Select raster 1 of the template, paste paper 1, invert and delete.
Delete the template layers also as you go along.

Raster 2 and 6 of the template, paste paper 5, invert and delete.

Number 3 of the template, apply the PhotoEffex filter-Scanlines,
width at 2, spacing at 2, noise at 100%.

Merge layer 5 down with number 4, select all, float, defloat and
fill with #ca3a7c or color of choice.
Resize element 52 to 35% and paste in the circle.

Paste your tube, resize as needed and place on the left side, move the wordart over and down some to the left.
Select the wordart, float, defloat, paste paper 15, invert delete, select none.
Select again, float, defloat, expand by 2, new raster layer, fill with white, move below, select none and add your drop shadow.

Resize element 37 to 85%, place below the ribbon layer on the circle.

Resize element 15 to 85% and place on the right side.
Resize element 39 to 50%, place below the shoe layer and adjust to your liking.

Paste element 57 just above the mask layer, move where you like, erase parts of it, duplicate, mirror, adjust, erase, duplicate again and place how you like it.

Paste element 45 on the right side below the small circle layer or where you like the looks of it.
Add any other elements you would like.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

 photo buttonforpagefall_zps98c7cc22.png

 

Sunday, July 13, 2014

She's a Cowgirl

 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE
 
Supplies Needed
I used PSPX...but any of them should work.
Scrap Happy Trails  by Creative Scraps by Cry HERE
This was part of a Blog Train
Collab Template 2 by Millie and Rissa  HERE or HERE
WSL Mask 208  HERE
Filters
EyeCandy 4000-Gradient Glow (Optional)
Photo Effex-Scanlines
Font I.F.C. Los Banditos
Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*
 
Open the tag template, hold the shift key and d to duplicate and close the original.
Delete each layer of the template as you go along also.

My usual is to go to Image, canvas size 800 x 800, I always like a lot of room, you can always resize later.

Being on the bottom layer of the template, fill with a color of choice, I used #6d4219, apply your mask, delete and merge group. You may want to resize your mask larger later.

Select raster 6, new raster layer, fill with #f0c893, select none, apply PhotoEffex filter-Scanlines width on 1, spacing 2.
Paste element 2.
Moving to the top layer, paste element 15, move down on the template and then move to just above the wheel layer, duplicate, mirror.

Select raster 2, paste paper 2, invert, delete.
Apply EyeCandy 4000 gradient glow with this color  #f9efe5, width at 3.
Merge copy of raster 3 down with raster 3 and paste the same paper #2, invert, delete.
Apply the same gradient glow with this color #f9efe5, width set at 3.

Select raster 5, new raster layer, fill with black, then go to Effects, Texture Effects, weave with these settings
1, 5, 1 both colors on white.

Select raster 4, paste paper 1, invert, delete.
Raster 8, paste paper 2.
Copy of raster 7, merge down with raster 7, add noise at 40%.

Vector 1, wordart Cowgirl, resize to 50%, select all, float, defloat, new raster layer, fill with color of choice, I used #ff97cc.
Then go to Effects,  3D effects, inner bevel with these settings
Bevel shape 2, width 4,
15, 15, 4, 0
48, 36, 42
color white
Then apply the texture effect, weave with the same settings as before.
Then select all, float defloat, expand by 2, add a new layer, fill with #f1d4bf, move below the wordart, add your drop shadow.
Move to the left side more.

(Resize and paste the following elements, arrange to your liking).

element 25-size to 50%, place on right side.
element 20-size to 50%, duplicate resize again to 85%, place
on each side.
element 9-size to 30%, place on left side.
element 22-size to 50%, duplicate resize again to 70%, mirror, place how you like them.
element 26-size to 35%, place on left side.
element 3-size to 25%, use your pick tool to rotate it some,
place by the hat.
element 6-resize to 85%, then I duplicated, mirror and erased the parts I did not want.
element 8-resize to 80%, move below the fence layer on the right.
element 17-size to 35%, place above the fence layer on the right,
duplicate mirror, moving the mirror one below the hat layer.
Being on the top layer, resize and paste your tube and place how you like it.

Add any other elements you would like.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Showing off the Signature and Avator I made to go along with the tag.
Did not tut it, but all you do is take parts of your tag, resize to your liking and place how you want everything.
Always rememeber to add your copyrights to all your finished tags.