Thursday, October 27, 2016

The Night is Haunted

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Zindy S.D. Nielsen.
The tube is called She is Hot.
You need a license to use this art work. Please do not use without a license.
 You can find this art at her Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap  Fright_Fest by Naes Dezines  HERE
Check out the rest of the blog  HERE
Tonya  Halloween Mask 2 on Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Animation 139 by Simone  HERE
Check out the rest of the blog HERE
Filters
Xero-Radiance

 Font of Choice, I used Young Frankenstein

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 6, apply your mask, delete, merge group, duplicate, merge down.
Resize frame 3 to 70%, paste on the mask, click inside with your magic wand, expand by 5, paste paper 15, move so the moon shows, invert, delete, select none.

Paste your tube on the frame off center to the left, then go to Adjust, Hue and Saturation,
colorize with both numbers on 0.
Then apply the Xero Filter-Radiance

Resize the stone path to 55%, paste below the tube, duplicate, move to the right below the paper layer of the frame, duplicate, move to the left still being below the paper layer.

Resize cat 1 to 40%, place at the bottom in front of your tube layer to hide the straight edge of the tube.
Resize weed 2 to 40%, duplicate as many times as you like and place where you like, above and below the frame.

Resize element 5 to 50%, paste on the right side above the tube layer, sharpen once.
Resize the broom to 20%, place on the right above the pot, sharpen a couple of times.

Resize the bench to 50%, place behind the tube layer on the left.

Resize element 20 to 65%, place below the top stone path and adjust to your liking, duplicate twice, mirror one and move both below the paper layer of the frame.

Resize element 19 to 50%, paste on the right below the rock element.
Resize the skeleton to 25%, place on the right below the grass behind the pot.
Resize whichever bats you like to 25%, and place at the top where you like.

Resize the crow to 25%, place on the bench and sharpen a couple of times.
Resize tree 1 to 40%, place on the left, just above the mask layer, duplicate, mirror.

Resize the haunted house to 65%, place above the mask layer on the right, sharpen several times, duplicate, mirror, adjust to your liking.

Resize the word haunting to 15%, apply a medium glow with this color #c0c0c0, then duplicate a couple of times and place where you would like.

Add any other elements you would like, make it your own.

If you would like to animate, keep a white background and merge visible, resize, add your copyright and name, cope to animation shop and make the same amount of layers as the animation, this one has 32 layers.
Then go to edit, copy all on the animation, then click on the tag and edit, select all, paste into selected frame on the right on the house at the top part, check animation and if happy save.

If no animation this do this instead.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Tuesday, October 25, 2016

Autumn Babe

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Alicia Mujica.
You need a license to use this art work. Please do not use without a license.
Tube is called September 2016.
You can find this art at her Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap Noche de brujas ll  HERE
Check out the rest of the blog HERE
WSL_Mask 536  HERE
Filters
Mura Meister Copies-Encircle

Font of Choice, I used Blacksword

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, resize paper 4 to 28%, paste, apply your mask, delete, merge group.

Resize Corona element to 30%. Take your free hand tool, draw around the wreath, making sure to get the smaller openings also, resize paper 1b to 28%, paste, invert, delete, move below the wreath.

Resize Hojas to 30%, apply Mura Meister Copies-Encircle with the first number being on 25, move below the paper layer of the frame.

Resize Hojas2 to 25%, apply Mura Meister Copies-Encircle again, paste above the other leave circle.

Resize your tube to 45%, place in the center on top of the wreath.

Resize the Varios element to 20%, paste on one side of the wreath, duplicate, mirror.

Resize Hojas 2 to 25%, paste on top of the Varios element on one side, duplicate, mirror, duplicate one and move to the center.

Resize the Tarro element to 25%, place on the left side above the leaves.

Resize the Cacerola element to 15%, place by the Tarro element.

Resize the Calabaza to 40%, place on the left below the tube layer.

Resize the element Tinaja to 25%, place on the right below the tube layer.

Resize the element Cazo to 20%, place on the left on the clay jar.

Resize the Vela element to 25%, place on the right above the tube layer.

Resize the Manta element to 20%, paste on the frame layer at the bottom, duplicate, mirror.

Resize the Calabaza 2 to 20%, paste below the paper frame on one side so just the grass part shows at the bottom, duplicate, mirror.

Resize the Caro element to 20%, place on the right above the large green leaves.

Resize the Libro element to 12%, place on the top layer by the leg of your tube.

Resize Brillos to 45%, place on the top layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Sunday, October 23, 2016

Geisha Lady

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Zlata_M.
The tube is called Geisha
You need a license to use this art work. Please do not use without a license.
 You can find this art at her store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Japan by Simple Expressions  HERE
Be sure to check out the rest of the blog HERE
WSL_Mask 84 HERE
Font of Choice, I used Yozakura

Drop Shadow usually V2 H2 50 black
Let's get started
*Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 2, resize to 135, apply your mask, delete, merge group.

Paste frame 2, then paste frame 1, apply the same mask that you used on the paper to this frame, delete, merge group, duplicate twice, merge each of these frames down, free rotate to the left at 15.
Click inside the black frame, expand by 5, paste paper 2, invert, delete, and mirror your close up, paste close up tube, delete, select none.

Paste the fan on the mask layer at the top, duplicate, free rotate to the left at 90, duplicate, mirror, duplicate the top one, flip, erase parts that you do not want showing once you adjust them all.

Resize your full tube to 85%, place on the right side on the top frame.

Resize the umbrella to 80%, place behind your tube at the upper right.
Paste the bonsi tree behind the tube on the right.
Resize flower arrangement to 85%, place on the right below the tube layer, duplicate, mirror, resize to 85%.
Paste the lantern on the right below the bonsi tree, duplicate, move over a bit to the center, duplicate again, resize to 85%, move over to the left, below the flower arrangement.

Resize the tea set to 85%, paste above the tube on the right.

Paste the cherry blossom at the bottom left side, duplicate, move to the right below the bonsi tree, duplicate, free rotate to the left at 90, place on the right below the lantern layer.

Resize the lantern pin to 75%, place at the upper left, erase some of the pin to make it look like it is going thru the frame.
Paste flower 1 at the bottom left being on the top layer, duplicate twice, move where you like, moving them below other layers on the left.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Saturday, October 22, 2016

The Witchy Hour

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Anna Liwanag.
The tube is 67-3
You need a license to use this art work. Please do not use without a license.
 You can find this art at CDO Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap  Witches Brew by Manipulated by Magik  HERE
Check out the rest of the blog  HERE
  Tonya  Halloween Mask 2 on Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Animation 138 by Simone  HERE
Check out the rest of the blog HERE

Font of Choice, I used Rofi Taste

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 14, apply your mask, delete, merge group. 

Resize the castle to 80%, place on the right and up some, then go to Adjust, Hue and Saturation, Colorize and put both numbers on 0, duplicate, change the blend mode to burn, merge down, duplicate, mirror and move down some.

Paste the spider web on the castle layers.

Paste the tombstone in the center above the spider web, duplicate, resize to 75%, move to the right, duplicate, move to the left side.

Paste your tube on the left side of the center tombstone.

Paste the skulls grass on the left, above the tube layer, duplicate, mirror.
Resize the pumpkin to 45%, place below the grass on the right, duplicate, move over to the left, duplicate, move above the one you just moved to only have the larger one showing in the back.

Resize the spider to 25%, place on the pumpkin on the left, duplicate, move over to the top of the tombstone on the right.
Paste the tree behind the tombstone and up more in the center, duplicate, change the blend mode to burn, duplicate twice, move one to the left and one to the right.

Resize Salem to 50%, place on the bottom in front of the skull grass where you like.
Resize the shoes to 40%, place more on the right side.

Paste the sparkles at the top below the tube layer, duplicate, move down above the tombstones on the bottom.

Add any other elements you would like, make it your own.

IF you want to Animate,
merge all with the white background, resize, add your copyright and name, take to Animation and make 31 layers, the same amount as the animation.
Go to Edit, select all on the animation, then on the tag, select all, paste into selected frame and paste the first head of the animation on the tombstone on the right a little above it.
Test and if happy save.

If not going to animate then do this

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name and any wordart you would like.
That's it
Hope you enjoyed doing my tut.

Hope & Believe-BCA

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Keith Garvey.
The tube is called Aubry.
You need a license to use this art work. Please do not use without a license.
 You can find this art at his Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Mask BCA 1 by Bam Bangers Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE
Scrap Save the Boobies by Polka Dot Scraps HERE
Check out her blog HERE
Filters
Xero-Porcelain
Toadies-What Are You

 Font of Choice, I used Casablanca Noir

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Another quickie one.

Open a new image 800 x 800 or a size you prefer, paste paper 3, apply your mask, delete, merge group, adjust to fit your tag later.

Resize frame 2 to 95%, paste, duplicate, being on the bottom one apply the filter-Toadies-What are you with these numbers on both 12.
Click inside your top frame, expand by 5, paste paper 6, invert, delete, move below, select none.

Paste your middle size tube, move below the frame, duplicate, move above and erase the parts you do not want on both tubes.
Apply the Xero filter-Porcelain to both tubes.

Paste print 2 above the toadies frame layer at the upper right, duplicate, flip, mirror, adjust both to your liking.

Resize the scatters to 40%, apply Mura Meister Copies-Encircle with the first number on 20, paste below the Toadies frame.

Paste the heart stem on the right above the tube layer, erase the stem part on the frame.

Resize the wordart to 50%, place on the left on the top layer, duplicate, move to the right and down a bit.

Resize the hope pin to 50%, place on the frame on the left, erase part to make it appear to be pinned to the frame.
Resize ribbon 1 to 50%, place at the bottom in the center on the frame.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.

That's it
Hope you enjoyed doing my tut.

Thursday, October 20, 2016

Witches Brew

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Alehandra Vanhek.
The tube is called Trisha, and she has extra clothing you can buy.
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap  Witches Brew by Manipulated by Magik  HERE
Check out the rest of the blog  HERE
  Tonya  Halloween Mask 2 on Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Animation Candle Flame by Simone  HERE
Check out the rest of the blog HERE
Filter
Mura Meister Copies-Encircle

Font of Choice, I used Master of Break

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer, add a new layer, fill with white.
Paste paper 5, apply your mask, delete, merge group.

Paste your close up tube, mirror, adjust where you want it, then apply the same mask,
change the blend mode to hard light.
Paste the spider web on the tube and move up a bit, change the blend mode to overlay.

Resize your tube to 45%, place toward the bottom.

Paste the apothecary bottle behind the tube on the right.
Resize the poison bottle to 50%, place in front of the first bottle on the right, duplicate, mirror.
Resize the empty bottle to 50%, place behind the poison bottle.
Paste the candelabra on the left in front of the poison bottle.

Resize the books to 60%, place above the tube layer in the center.
Resize the candy to 50%, place by the books.
Resize the cat Salem to 70%, place on the right side.
Resize the shoes to 50%, place on the right side above the cat layer.
Resize the pouch to 50%, place on the left by the books.
Resize the Chalice glass to 40%, place by the pouch.

Resize the sparkles to 80%, apply Mura Meister Copies-Encircle with the first number on 30,
move below the mask layer, duplicate, merge down and sharpen.

Resize flower 6 to 60%, place below the bottles on the left, duplicate, mirror, adjust on the right, duplicate again and move down so some shows at the bottom.
Paste the berry branch on the right between the bottles.

Add any other elements you would like, make it your own.

If you want to Animate
Resize all layers first, add your copyright and name first, then copy
merged with the white background to animation and make as many layers as the candle flame has, which is 21 layers.
Then click on the first candle layer in animation, go to Edit, select all, copy.
Then on the first layer of your tag, go to Edit, select all, paste into selected frame.
Keep pasting in selected frame until all the candles are lit.
Test your animation and if happy save.

If you are not going to animate, then do the below.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Wednesday, October 19, 2016

Autumn is Here

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Andy Cooper.
The tube is called Fall Scarf
You need a license to use this art work. Please do not use without a license.
 You can find this art at ScrapNCompany Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap Autumn is Here by Elli's Creations  HERE
Check out the rest of the blog  HERE
Gems Mask 171  HERE
Check out the rest of the blog HERE

Font of Choice, I used Watermelon Script

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, delete, merge group.  Resize mask larger to 145%.
Paste element 47 on the mask layer, adjust to fit your tag later.

Paste element 19, move up some, duplicate, move down more.

Resize element 2 to 95%, paste at the bottom part of the gravel layer.

Paste element 18 on the path layer.

Resize element 6 to 75%, paste behind the wall so the trunk of the tree shows thru the window, duplicate, mirror, move below the first tree and adjust, erase any part that you do not want showing.

Resize your tube to 60%, place more to the left side.

Resize element 23 to 65%, mirror, place behind the tube on the left.
Resize element 26 to 20%, place by the tube on the right.

Resize element 75 to 55%, paste on the back wall by the open window, duplicate, resize to 75%,  move to the right corner of the wall, duplicate, mirror.

Resize element 29 to 40%, place on the right above the grass layer.
Resize element 10 to 20%, mirror, place by the sign on the right, duplicate, mirror, place below the bicycle layer on the left.
Resize element 11 to 10%, duplicate, place by the squirrel.
Resize element 14 to 40%, place above the grass layer at the bottom of the wall.

Paste element 5 on the wall.

Resize element 31 to 25%, free rotate to the right at 90, place by the foot of your tube on the left.
Resize element 33 to 25%, place at the top where you like.

Resize element 52 to 75%, paste behind your tube layer and adjust.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name and any wordart you would like.
That's it
Hope you enjoyed doing my tut.

Tuesday, October 18, 2016

Haunting

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Laguna.
The tube is called Amanita witch with a kitty.
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap  Fright_Fest by Naes Dezines  HERE
Check out the rest of the blog  HERE
MB&SW Mask 65  HERE
Check out the rest of the blog HERE

Filters
EyeCandy 4000-Gradient Glow (Optional)

 Font of Choice, I used Devil East

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or a size you prefer.
Paste paper 11, apply mask 65, delete, merge group.
Paste paper 5, apply the same mask again, change the blend mode to burn, merge down.

Paste the stone path and resize to 90%, move to the bottom.
If using the same tube as I am, resize to 25%, place on the left.

Resize the old car to 55%, place behind the tube layer on the right.

Resize element 20 to 85%, paste below the old car layer how you like, duplicate, mirror, move up some, duplicate again, mirror, move up again, adjusting to your liking.

Resize the skeleton to 25%, place on the rocks below the tube layer, duplicate, mirror, making them sitting on the flat part of the rock wall.

Resize element 19 to 50%, place on the mask layer off center to the left, duplicate, resize to 55%, move to the right a bit, duplicate, mirror, adjust behind your tube.

Resize tree 4 to 25%, paste below the headstone on the right, sharpen once or twice.
Resize cat 1 to 30%, place in front of the old car on the right.
Resize book 1 to 30%, place on the left under the hand of your tube, sharpen a couple of times.
Resize book 4 to 25%, place by the leg of your tube, sharpen once.
Resize the rat to 25%, place by the book on the left.

Resize the chain to 25%, place under the cat, sharpen a couple of times.

Resize the bats 2 to 40%, mirror, move to the left, apply a gradient glow with these setting using
Eye Candy 4000-Gradient Glow
Width 3,  Soft Corners 25, Over all Opacity at 50 and color #eb5b29

Resize weed 1 to 50%, place behind your tube, sharpen several times to give it some highlights, then duplicate a couple of times and place where you like, moving below some of the rock areas.

Resize element 1 the handprint to 10%, place on the hood of the truck, duplicate and move over a bit.
Resize the sign to 35%, place on the right on the tree.
Select the word you would like for your sign, I picked Haunted and resized it to 5%, placed it on the sign and added the gradient glow like before.
Resize bird 2 to 15%, mirror, place on the sign, sharpen several times.
Resize the leaves to 65%, place on the stone under your tube and move below the old car layer.

Resize moon 2 to 30%, place at the top on the mask layer behind the tree, change the blend mode to Hard light.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Monday, October 17, 2016

Halloween Treat

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Alicia Mujica.
You need a license to use this art work. Please do not use without a license.
Tube is called Perpetua.
You can find this art at her Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap Halloween Treat Collab by Scrap Dimensions  HERE
Check out the rest of the blog HERE
Mask 228 by Gems Taggin  HERE
Check out the rest of the blog HERE

Font of Choice, I used Gondoliere

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 3, apply your mask, delete and merge group, resize the mask larger to 125%.

Resize element 5 to 60%, place on the left side.

Resize your tube to 35%, place on the right with the hand on the cauldron pot.

Resize element 6 to 40%, place on the right side.
Resize element 15 to 75%, place on the left below the pot, duplicate, mirror.
Resize element 21 to 25%, place on the left side, duplicate, move out and up just a bit.

Resize element 16 to 45%, paste below the tube layer on the left at the bottom, duplicate, move below the pot and down toward the bottom, duplicate again and move over to the right.

Paste element 26 on the mask layer and move left a bit, change the blend mode to
Luminance (Legacy) and lower the opacity to 70.
Resize element 3 to 20%, place on the center of the spider web.

Resize element 12 to 75%, paste below the tube layer, mirror, move back to the right.

Resize element 4 to 60%, paste in front of the tube layer against her legs.

Resize element 24 to 20%, paste at the upper right.
Resize element 23 to 25%, place on the cauldron pot and erase some of the stem to make it look like it is in the pot.
Resize element 27 to 30%, place between the two toxic bottles at the bottom left, duplicate, move toward the center and below the tube layer, move up so just the fallen petals are showing, duplicate again and move over under the 3 bags, erasing any of the stem showing.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Cute Witch Glenda

This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Alicia Mujica.
You need a license to use this art work. Please do not use without a license.
Tube is called Glenda.
You can find this art at her Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap Fright_Fest by Nae Dezines-Afternoon Delight  HERE
Check out the rest of the blog HERE
Tonya  Halloween Mask 2 on Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE

Filters
Mura Meister Copies-Encircle

Font of Choice, I used Gondoliere

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, add a new image, fill with #671ca5,
apply your mask, delete, merge group.

Paste frame one, resize to 60%, click inside with your magic wand, expand by 5, add a new layer and fill with #bd9dd5, select none, move below the frame.
Resize frame 6 to 85%, paste below the color layer of the frame.

Resize flower 6 to 25%, apply Mura Meister Copies-Encircle, changing the first number to 30,
paste above the black frame.
Resize leaves 5, to 35%, apply Mura Meister Copies-first number still on 30, paste below the flower circle.

Resize your tube to 35%, place below the purple frame, duplicate, move above the frame, erasing the bottom part of the tube, but leaving the hand and broom above the frame.

Resize the bench to 65%, paste on the right below the broom.
Resize book 2 to 50%, place on the bench.

Resize the boot to 40%, place on the left, duplicate, mirror, move back to the left how you like.

Resize cat 2 to 40%, place by the bench.
Bottles 9 are several bottles, pick the ones you like and resize to what you want, I resized the three I used to 40% and placed two of them on the bench and one by the cat.

Resize pumpkin 1 to 50%, place on the left below the boots.

Paste leaves 4 above the top tube layer at the bottom.
Resize the spider to 75%, paste at the bottom on the leaves, duplicate, move over on the bench.
Resize flower 7 to 25%, free rotate to the left at 45 degrees, mirror, place on the left below the boot layers, duplicate, mirror, move above the orange bottle on the bottom.

Resize bat 2 to 30%, place at the top right, duplicate, mirror, adjust.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Fall Weather


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Alicia Mujica.
You need a license to use this art work. Please do not use without a license.
Tube is called Corine.
You can find this art at her Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
 Scrap Fan Freebie #3-Autumn Theme by Tasha's Playground   HERE
Check out the rest of the blog HERE
Mask 196 by Scrappy Bit of Fun-Simone  HERE
Check out the rest of the blog HERE
Font of Choice, I used ?

Drop Shadow usually V2 H2 50 black
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer, paste paper 1, apply your mask, delete, merge group, duplicate,  merge down.

Paste frame 2, free rotate to the left at 15 degrees, move to the left a bit.
Click inside the frame with your magic wand, expand by 5, paste paper 1, invert, delete, select none, move below the frame.

Paste element 6 in the frame.

Paste element 9 on the frame layer on the right, duplicate, mirror, move below the paper layer of the frame on the left.

Paste element 37 on the right below the fence layer, duplicate, move to the left below the paper layer of the frame..

Resize your tube to 35%, place on the right above the fence layer.

Paste element 21 below the tube layer at the bottom, duplicate, mirror, adjust.

Resize element 23 to 50%, place on the left below the bark layer.
Resize element 31 to 50%, place on the right on the bark.

Resize element 2 to 50%, place on the right below the fence layer, duplicate, mirror, move below the paper layer of the frame and up some, duplicate one, resize to 50%, move above the bark layer at the bottom and place how you like, duplicate once or twice and place.

Resize element 4 to 35%, place where you like, duplicate once or twice and place where you like.
Paste element 30 inside the frame layer.

Resize element 26 to 35%, free rotate to the right at 20 degrees, duplicate, mirror and place them where you like, duplicate, move below the tree layer on the left, duplicate, mirror, adjust both to your liking.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Wednesday, October 12, 2016

Hot Stuff

 This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
The tube is called Hell Babe
You need a license to use this art work. Please do not use without a license.
 You can find this art at his Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap Burning_Halo HERE
Check out the rest of the blog HERE
Scrappy Bit of Fun Mask 209 by Simone HERE
Scrappy Bit of Fun Animation 134 by Simone HERE
Check out the rest of the blog HERE

Font of Choice, I used Your Fear

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 4, resize larger to 130, paste your mask, delete, merge group.

Paste the mesh, duplicate, flip and adjust.

Paste frame 1, move to the left a bit, duplicate, change the blend mode to burn, merge down.
Free rotate to the left at 10 degrees.
Click inside with your magic wand, expand by 5, paste paper 5, invert, delete, move below the frame, mirror your middle size tube, paste, delete, select none.
Duplicate the tube, change the blend mode to burn, merge down.

Resize your full tube to 85%, place on the right side.

Paste the fire below your tube layer, duplicate, move above the tube layer and erase the parts on the left of the tube.

Paste the word Hell and change the blend mode to Luminance (Legacy).

Resize Ghost Satan to 95%, place behind the tube on the right.

Paste the candle on the right below the Ghost Satan.

Resize the Heel to 60%, mirror, place on the left side by the H of the word Hell.

Paste the label, hot stuff below the tube layer by her hand, change the blend mode to hard light.

Resize the flair button to 75%, place below the fire layer on the left.

Add any other elements you would like, make it your own.

Animation if you would like to do this part
Keep a white background on your tag, resize all layer to 80%, do not merge your tag.
Add your copyright and name now also.

Close off your tube layer, the fire above your tube, the copyright and name, copy merged to animation shop.
Make 21 layers of your tag to match the animation layers.
Edit, select all, copy on the animation, then go to your tag, click, edit, select all, paste into selected layer, paste the animation on the right side of your tag.
Go back to psp, open your tube layer and fire layer, close off everything else, copy merged these two layers to animation, make 21 layers, then edit, select all, edit, paste into selected frame

If no animation then do this
Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Whatever-Check Your Bumps BCA


 This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
The tube is called Color Girl
You need a license to use this art work. Please do not use without a license.
 You can find this art at his Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap OH My PINK by Lady Dragus HERE
Check out the rest of the blog HERE
Mask BCA 1 by Bam Bangers on Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE
Wordart by Millie HERE
Check out the rest of the blog HERE
Filters
Mura Meister Copies-Encircle
Eye Candy 4000-Gradient Glow
Font of Choice, I used Casablanca Noir

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 14, apply your mask, delete, merge group, adjust to fit your tag later.

Paste element 15, click on the parts you would like to add noise, add noise at 40% or more if you prefer.

Resize element 23 to 40%, apply Mura Meister Copies-Encircle, move below the clock.

Paste your tube on the left side, resize to 75%, move below the clock, duplicate, move above the clock and erase so the number 6 and 3 show.

Paste element 65 on the right, resize to 55%, move below the clock, duplicate, move above and erase some so the number 12 shows all.

Resize element 100 to 50%, place by the glass on the right how you like.

Paste the wordart Check your bumps for lumps on the glass, add a fat white gradient glow, using Eye Candy4000, gradient glow, width set on 3, resize to 50% and place on the glass.
Then paste the wordart, Positively Pink year round below the clock layer, duplicate, move above the tube layer and erase so the number 3 shows and any part of the leg of the tube showing over the wordart also erase.

Resize element 88 to 50%, place just above the flower circle layer on the left, duplicate, mirror, move above the glass layer and place how you like.

Place sparkle 2 on the flower circle on the upper right, duplicate, flip, go back to the top right, duplicate, mirror.
Resize element 92 to 25%, place by the glass on the right.

Paste element 19 just above the mask layer at the bottom, duplicate, mirror, adjust.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Tuesday, October 11, 2016

BCA-Save the Boobies


 This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Lysisange.
The tube is called Octobre Rose, it is FREE on her blog
This is a free tube you can use and get it from her blog
 You can find this art on her blog  HERE
Check out the rest of the blog HERE

Supplies Needed
I used PSPX...but any of them should work.
 Scrap Pink Hope by Scraps by Gina HERE
Check out the rest of the blog HERE
Template by Creabie on Creative Misfit Creations Blog HERE
Check out the rest of the blog HERE
Mask BCA 1 by Bam Bangers HERE

Filters
Mura Meister Copies-Encircle

Font of Choice, I used Casablanca Noir

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open your template, hold the shift key and hit the letter d to duplicate, close the original,
delete the credits.
Paste paper 5, apply your mask, delete, merge group.

Select layer 2, select all, float, defloat, paste paper 2, invert, delete, select none.

Click on raster 4 the black circle, expand by 2, paste your tube,  adjust, invert, delete, select none and move below the wordart in the circle, duplicate, Gaussian blur at 4, change the blend mode to screen, merge down.
Add a pink drop shadow to the wordart in the circle.

Select the BCA letters, paste your tube how you like, invert, delete, select none,
change the blend mode to screen.
Select the black outline, add a new layer and fill with #ea7182, add noise at 40%. Do this on each of the black frames.
Do the same on the circle wordart, and duplicate it and merge down.

Being on the top layer, resize your tube to 40%, place on the left side.

Select raster 6, paste paper 2, invert, delete, paste your tube how you like, delete, change the blend mode to screen, select none.
Resize ribbon 2 to 50%, place it where the black ribbon is and delete the black one.

Paste the heart scatter on the top layer.
Resize bottle 2 to 50%, place on the tube layer on the left.
Paste flower 2, mirror, rotate to the right at 25%, place behind the tube on the left.
Resize flower 7 to 50%, place below the jar on the left, duplicate, mirror.
Paste the dog on the right, resize to 75%, adjust.
Resize the hearts to 50%, mirror, place where the small one is on the ribbon part and below the dog layer.
Duplicate, resize to 75%, place by the jar or where you would like.
Resize the coffee cup to 50%, place on the right below the dog layer.
Resize leaves 5 to 50%, place below the flower on the right, duplicate, mirror, move behind the tube, duplicate again and move back and down some to the right.
Resize the bird to 35%, place on the right below the greenery.

Paste leaves 3 below the mask layer, apply Mura Meister Copies-Encircle.
Resize frame 2 to 122%, paste above the leaves layer.
Resize bow 2 to 50%, paste by the greenery on the right by the bird.
Resize the cupcake to 35%, place by the cup, duplicate and move one up a bit.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Monday, October 3, 2016

Spell Bound


This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Alex Prihodko.
The tube is called Witch_4.
You need a license to use this art work. Please do not use without a license.
 You can find this art at the PFD Store  HERE

Supplies Needed
I used PSPX...but any of them should work.
Scrap Something Wicked by Melissaz Creationz HERE
Check out the rest of the blog HERE
Gems Mask_228 HERE
Check out the rest of the blog HERE

Filters
Screen Works-Light Gauze

 Font of Choice, I used  RofiTaste

Drop Shadow usually V2 H2 50 black
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800
Paste paper 9, apply your mask, delete and merge group, resize the mask larger to 130%.

Paste element 3, the frame, click inside with your magic wand, expand by 5, paste paper 3, move below the frame, invert, delete, paste your tube, delete, select none.
Duplicate your tube, go to Adjust, Blur, Gaussian blur at 4, change the blend mode to screen.
Apply the Screen Works filter-Light Gauze, merge tube down, mirror.

Paste element 15 on the frame layer.

Resize your tube to 50%, place at the bottom part of the frame.

Paste element 19 under your tube, duplicate, move over, duplicate a couple more times and move up behind the tube more.

Resize element 10 to 70%, place on the right under the arms of the tube.

Resize element 2 to 63%, paste on the mask layer and move up, duplicate, move down on the left, erase the part showing on the right, duplicate, mirror.

Resize element 4 to 60%, place on the upper right side below the paper layer of the frame.

Resize element 29 to 65%, place in front of the tube, resize element 30 to 70%, place by the first bottle.
Paste element 33 on the left by the bottles, duplicate, move up where you like.

Resize element 22  to 75%, place in front of the tube layer about center.

Resize element 34 to 75%, place by the skull, duplicate, mirror, place below the book layer on the right.

Paste element 32 on the left side above the tube layer where you like.

Resize element 11 to 65%, place on the left above the tube layer.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.

Sunday, October 2, 2016

BCA Keep Fighting


 This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
The tube is called BCA Sexy
You need a license to use this art work. Please do not use without a license.
 You can find this art at his Store  HERE
Supplies Needed
I used PSPX...but any of them should work.
 Scrap Freaky Chic by Gimptastic Scraps HERE
Check out the rest of the blog HERE
Mask 62 of MB and SW HERE
Check out the rest of the blog HERE

Font of Choice, I used Master of Break

Drop Shadow usually V2 H2 50 black
Drop shadow on this one I used V-2 H-2 Blur 15
Use whatever drop shadow you prefer
 *Remember to add your drop shadow as you go along*

Open a new image 800 x 800 or one you prefer.
Paste paper 10, resize larger to 130%, apply your mask, delete, merge group.

Paste frame 5, free rotate to the right by 10, click inside with your magic wand, expand by 5,
paste paper 4, move below the frame, invert, delete, now paste your middle size tube, adjust to your liking, delete, select none.

Resize your smaller tube to 80%, place on the left side above the frame.

Resize the arrow to 60%, place at the upper right above the frame.

Paste the candle to the bottom right.

Resize boot 2 to 75%, place on the left above the tube layer, duplicate, mirror and move back to the left.

Resize the tank top to 75%, free rotate to the right at 10, place below the candle layer on the right.
Resize flower 2 to 65%, place below the candle layer toward the center more.
Resize flower 1 to 65%, place below the purple flower.

Paste the swirl below the tube on the left, free rotate to the right at 90, adjust.

Resize star 2 to 50%, place at the upper right on the frame layer.

Resize the ipod to 65%, free rotate to the left at 15, click inside the screen, paste your smaller tube with the ribbon showing, invert, delete, select none, change the blend mode to hard light.
Soften the edges with your soft tool brush.

Resize the buttons to 70%, paste by the candles.

Add any saying you would like, I put Keep Fighting.

Add any other elements you would like, make it your own.

Crop your tag to be sure no stray shadows are on the edges of your tag.
Once happy with it all, close off any backgrounds, merge visible.
Resize first, then add your copyrights and name.
That's it
Hope you enjoyed doing my tut.